Epson TM-H6000IV with Validation Technical Reference Guide - Page 51
Selecting the Print Density (DIP Switches 2-3/2-4), Function, SW 2-3, Original Paper Type
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 2 Setup Selecting the Print Density (DIP Switches 2-3/2-4) Function Print density (standard) Print density (darker than standard) Print density (dark) SW 2-3 OFF ON OFF SW 2-4 OFF OFF ON Depending on the paper type, it is recommended to set the print density as shown in the table below for the best print quality. Original Paper Type Density Level TF50KS-E, TF60KS-E, PD150R, PD160R, PD190R, P220AGB-1, AF50KS-E, KT48F20, KT55F20, F5041, P350 Standard P300, P310 Darker than standard 2 • If the print density is set to "Darker than standard" or "Dark" level, printing speed may be reduced. • If the print density is set to "Darker than standard" or "Dark" level, paper dust will accumulate on the print head and print may be faint. For information on how to clean the thermal head, see "Cleaning the Thermal Head" on page 106. • The print density can be set with DIP switches (2-3/2-4) or the customized value. (See "Setting the Memory Switches/Receipt Enhancement" on page 65.) The initial setting of the customized value is "Depends on the DIP switch settings." If the customized value is changed, the value set with the customized value is enabled. 51