Epson tmu375 User Manual - Page 21
Grounding the Printer, Make sure that the printer is turned off. - tm u375 printer
View all Epson tmu375 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Grounding the Printer When you use the printer as a single unit (not connected to an intelligent module), you need to ground your printer. (Intelligent module connection is available for the TM-U375 only.) Recommended wire is described below. Thickness of wire : AWG18 or equivalent Diameter of terminal to be attached : 3.2 1. Make sure that the printer is turned off. 2. Connect the ground wire to the ground connector (marked FG) on the bottom of the printer with the screw provided on the printer. Alternatively, another screw located beside the power connector on the TM-U375P can be used to connect the ground wire. TM-U375 Setting Up the Printer 1-11
Grounding the Printer
When you use the printer as a single unit (not connected to an intelligent
module), you need to ground your printer. (Intelligent module connection
is available for the TM-U375 only.)
Recommended wire is described below.
Thickness of wire
:
AWG18
or equivalent
Diameter of terminal to be attached
:
3.2
1.
Make sure that the printer is turned off.
2.
Connect the ground wire to the ground connector (marked FG) on the
bottom of the printer with the screw provided on the printer.
Alternatively, another screw located beside the power connector on the
TM-U375P can be used to connect the ground wire.
TM-U375
Setting Up the Printer
1-11