Fujitsu 4860C Operator's Guide - Page 213
Fujitsu 4860C - fi - Document Scanner Manual
View all Fujitsu 4860C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
LCD display Descriptions Selectable parameters B.Drop-out Brightness SCSI ID Specifies the back page R dropout color for a G monochrome scan. B Adjust the Front/Back Brightness to compensate for the grayscale level differences between the CCDs. -6 to +6 Specifies SCSI ID of the scanner. 0 to 7 Product ID SCSI Bus Specifies the scanner product ID. fi4860C / fi4990C / M4099D / M3099G Specifies the SCSI data bus width, 8bit or 16 bit. 16bit/ 8bit Interface Specifies the interface to use Auto / when an optional or third party SCSI / interface board is installed in TPS the TPS (Third Party Slot). Default Mode Remarks On- Offline line G Avail- Avail- Settings via the able able PC have the priority. 0 Avail- Avail- able able 5 fi4860C Not Avail- New SCSI ID Avail- able valid after able power cycle. Not Avail- New setting Avail- able valid after able power cycle. 16bit Auto Not Avail- New setting Avail- able valid after able power cycle. Not AvailAvail- able able OPERATOR PANEL MENUS 7 7.2 Setup mode functions 7-13