Fujitsu 4860C Operator's Guide - Page 279

At this screen, press (Left arrow button) or (Right arrow button) and select scan resolution. Following parameters can be specified. 200: Scan at 200 dpi 240: Scan at 240 dpi 300: Scan at 300 dpi 400: Scan at 400 dpi 7 OPERATOR PANEL MENUS Press (Enter button) and confirm the setting. Then is redisplayed. (5) Press (Enter button). Then is redisplayed. At , select [START] and press (Start button). If fi-486PRFR and/or fi-486PRREis installed, is displayed for setting imprinter test conditions. If an imprinter(s) is not installed, the scanner starts scanning operations. Pr i n t = Of f / On : P r e / Po s t 6) At this screen, press (Left arrow button) or Select [On] to do imprinter test while scanning. Then, select the imprinter to use. If the printer to use is fi-486PRFR, select [Pre]. If fi-486PRRE, select [Post]. (Right arrow button) and: If imprinter test is not required, select [Off]. 7.5 Test Mode Details 7-79