Fujitsu MHT2030AT Manual/User Guide - Page 115
Supportable Ultra DMA transfer mode, MHT2030AT = X'0F
UPC - 683728090579
View all Fujitsu MHT2030AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
5.3 Host Commands *18 WORD 88 Bit 15-8: Currently used Ultra DMA transfer mode Bit 13: '1' = Mode 5 is selected. Bit 12: '1' = Mode 4 is selected. Bit 11: '1' = Mode 3 is selected. Bit 10: '1' = Mode 2 is selected. Bit 9: '1' = Mode 1 is selected. Bit 8: '1' = Mode 0 is selected. Bit 7-0: Supportable Ultra DMA transfer mode Bit 5: '1' = Supports the Mode 5 Bit 4: '1' = Supports the Mode 4 Bit 3: '1' = Supports the Mode 3 Bit 2: '1' = Supports the Mode 2 Bit 1: '1' = Supports the Mode 1 Bit 0: '1' = Supports the Mode 0 *19 WORD 89 MHT2080AT = X'28': 80 minutes MHT2060AT = X'1E': 60 minutes MHT2040AT = X'14': 40 minutes MHT2030AT = X'0F': 30 minutes MHT2020AT = X'0A': 20 minutes *20 WORD 93 Bits 15: = 0 Bit 14: = '1' Bit 13: '1' = CBLID- is a higher level than VIH (80-conductor cable). '0' = CBLID- is a lower level than VIL (40-conductor cable). Bits 12-8: In the case of Device 1 (slave drive), a valid value is set. Bit 12: Reserved Bit 11: '1' = Device asserts PDIAG-. Bit 10, 9: Method for deciding the device No. of Device 1. C141-E192-02EN 5-41