Fujitsu MHT2030AT Manual/User Guide - Page 91
Table 5.3, Command code and parameters 3 of 3
UPC - 683728090579
View all Fujitsu MHT2030AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
5.3 Host Commands Table 5.3 Command code and parameters (3 of 3) Command name READ NATIVE MAX ADDRESS EXT *O SET MAX ADDRESS EXT *O FLUSH CACHE EXT *O WRITE DMA EXT *O READ DMA EXT *O WRITE MULTIPLE EXT *O READ MULTIPLE EXT *O WRITE SECTOR (S) EXT *O READ SECTOR (S) EXT *O READ VERIFY SECTOR (S) EXT *O DOWNLOAD MICRO CODE Command code (Bit) Parameters used 7 6 5 4 3 2 1 0 FR SC SN CY DH 0 0 1 0 0 1 1 1 NNNND 0 0 1 1 0 1 1 1 NYYYY 1 1 1 0 1 0 1 0 NNNND 0 0 1 1 0 1 0 1 NYYYD 0 0 1 0 0 1 0 1 NYYYD 0 0 1 1 1 0 0 1 NYYYD 0 0 1 0 1 0 0 1 NYYYD 0 0 1 1 0 1 0 0 NYYYD 0 0 1 0 0 1 0 0 NYYYD 0 1 0 0 0 0 1 0 NYYYD 1 0 0 1 0 0 1 0 YYYND Notes: FR: Features Register CY: Cylinder Registers SC: Sector Count Register DH: Drive/Head Register SN: Sector Number Register R: Retry at error 1 = Without retry 0 = With retry Y: Necessary to set parameters Y*: Necessary to set parameters under the LBA mode. N: Not necessary to set parameters (The parameter is ignored if it is set.) N*: May set parameters D: The device parameter is valid, and the head parameter is ignored. C141-E192-02EN 5-17