Fujitsu MHT2030AT Manual/User Guide - Page 156
Locked Mode And Frozen Mode., Security Disable Password X'f6
UPC - 683728090579
View all Fujitsu MHT2030AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Interface Bit 0 1 2 3 4 5...15 Table 5.14 Selective self-test feature flags Description Vendor specific (unused) When set to one, perform off-line scan after selective test Vendor specific (unused) When set to one, off-line scan after selective test is pending. When set to one, off-line scan after selective test is active. Reserved Bit [l] shall be written by the host and returned unmodified by the device. Bit [3:4] shall be written as zeros by the host and the device shall modify them as the test progress. • Selective Self-test pending time [min] The selective self-test pending time is the time in minutes from power-on to the resumption of the off-line testing if the pending bit is set. (30) SECURITY DISABLE PASSWORD (X'F6') This command invalidates the user password already set and releases the lock function. The host transfers the 512-byte data shown in Table 5.15 to the device. The device compares the user password or master password in the transferred data with the user password or master password already set, and releases the lock function if the passwords are the same. Although this command invalidates the user password, the master password is retained. To recover the master password, issue the SECURITY SET PASSWORD command and reset the user password. If the user password or master password transferred from the host does not match, the Aborted Command error is returned. Issuing this command while in LOCKED MODE or FROZEN MODE returns the Aborted Command error. (The section about the SECURITY FREEZE LOCK command describes LOCKED MODE and FROZEN MODE.) 5-82 C141-E192-02EN