Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 45
Create a User Waypoint Defined by Latitude & Longitude, Knob to select the User WPT Information
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Flight Planning 6) Enter the departure time. Press the ENT Key when finished. Departure time may be entered in local or UTC time, depending upon system settings. 7) The flashing cursor moves to the ground speed (GS) field. Enter the ground speed. Press the ENT Key when finished. Note that in 'automatic' page mode, ground speed is provided by the system. 8) The flashing cursor moves to the fuel flow field. Enter the fuel flow. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel flow is provided by the system. 9) The flashing cursor moves to the fuel onboard field. Enter the fuel onboard. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel onboard is provided by the fuel totalizer. 10) The flashing cursor moves to the calibrated airspeed (CALIBRATED AS) field. Enter the calibrated airspeed. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, calibrated airspeed is provided by the system. 11) The flashing cursor moves to the altitude (IND ALTITUDE) field. Enter the altitude. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, altitude is provided by the system. 12) The flashing cursor moves to the barometric setting (PRESSURE) field. Enter the desired baro setting. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, the baro setting is provided by the setting entered on the PFD. 13) The flashing cursor moves to the air temperature (TOTAL AIR TEMP) field. Enter the desired air temperature. Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, air temperature is provided by the system outside air temperature. CREATE A USER WAYPOINT DEFINED BY LATITUDE & LONGITUDE 1) Turn the large FMS Knob on the MFD to select the 'WPT' page group. 2) Turn the small FMS Knob to select the User WPT Information Page. 3) Press the NEW Softkey. A waypoint is created at the current aircraft position. 4) Enter the desired waypoint name. 5) Press the ENT Key. Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 190-01254-00 Rev. A Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 29