Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 66
Terrain Awareness & Warning System (HTAWS) Display, System Self Test
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Hazard Avoidance Flight Instruments EICAS Nav/Com/ XPDR/Audio System Self Test 1) With the Traffic Map Page displayed, set the range to 2/6 nm. 2) Press the STANDBY Softkey. 3) Press the TEST Softkey. 4) Self test takes approximately eight seconds to complete. When completed successfully, traffic symbols are displayed and a voice alert is heard (see Alerts and Annunciations section). If the self test fails, the system reverts to Standby Mode and a voice alert is heard. Displaying Traffic on the Navigation Map 1) Ensure TAS is operating. 2) With the Navigation Map displayed, press the MAP Softkey. 3) Press the TRAFFIC Softkey. Traffic is now displayed on the map. TERRAIN AWARENESS & WARNING SYSTEM (HTAWS) DISPLAY WARNING: Do not use HTAWS information for primary terrain avoidance. HTAWS is intended only to enhance situational awareness. AFCS GPS Nav Flight Planning Procedures Hazard Avoidance NOTE: The data contained in the HTAWS databases comes from government agencies. Garmin accurately processes and cross-validates the data but cannot guarantee the accuracy and completeness of the data. Additional Features Abnormal Operation Annun/ Alerts NOTE: Terrain data is not displayed when the aircraft latitude is greater than 75° North or 60° South. Displaying the HTAWS Page: 1) Turn the large FMS Knob to select the Map Page Group. 2) Turn the small FMS Knob to select HTAWS Page. Changing the HTAWS Page view: 1) Press the VIEW Softkey. 2) Press the 360 or ARC Softkey to select the desired view. Or: 1) Press the MENU Key. 2) Select 'View Arc' or 'View 360º' and press the ENT Key to change the view. 50 Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A Appendix Index