Home » Garmin Manuals » GPS » Garmin G1000H » Manual Viewer

Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 88

Editing a Saved Network, Disconnecting a Wi-Fi Network, DISCNCT, DELETE

Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Additional Features To save and connect the selected network: a) Press the ENT Key. A checkmark is placed in the checkbox and the cursor moves to the airport field. b) Using the FMS Knobs, enter an airport identifier to be associated with the saved network. This aids in identifying the network later in the event of duplicate network names. c) Press the ENT Key. The cursor moves to 'CONNECT'. d) Press the ENT Key again to connect to the selected network. Editing a Saved Network 1) While viewing list of saved networks, press the FMS Knob to activate the cursor. 2) Turn either FMS Knob to highlight the network to be edited. 3) Pressing the ENT Key at this point will check or uncheck the AUTO CONNECT checkbox. When a checkmark is present, the system will automatically connect to the network when within range. 4) Press the EDIT Softkey. The cursor now appears in the CONNECTION SETTINGS window. 5) Turn the large FMS Knob to select the network attribute to be edited. 6) Turn the small FMS Knob to begin editing the field. 7) When the entry is complete, press the ENT Key. 8) Turn the large FMS Knob or press the ENT Key until 'SAVE' is highlighted. 9) Press the ENT Key. Disconnecting a Wi-Fi Network Press the DISCNCT Softkey. Deleting a Saved Wi-Fi Network 1) While viewing the list of saved networks, press the FMS Knob to activate the cursor. 2) Turn either FMS Knob to highlight the network to be deleted. 3) Press the DELETE Softkey. The selected network is removed from the list. Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 72 Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A

Section	Page
Flight Instruments	17
Selecting the Altimeter Barometric Pressure Setting	17
Selecting Standard Barometric Pressure (29.92 in Hg)	17
Change Altimeter Barometric Pressure Setting Units	17
Change Navigation Sources	17
Enable/Disable OBS Mode While Navigating with GPS	18
Enable heading Preset Mode	18
Disable heading Preset Mode	18
Generic Timer	19
Configure Vspeed Bugs Individually	19
Set Barometric Minimum Descent Altitude	19
Set Barometric/Radar Altimeter (RA Optional) Minimum Descent Altitude	20
Displaying Wind Data	20
Changing HSI Format	20
Engine Indication System	21
Engine Power and Speed Indications	23
Power Assurance Check	24
Crew Alerting System (CAS)	25
CAS Message Prioritization	26
Nav/Com/Transponder/Audio Panel	27
ADF Tuning (Optional)	27
DME Tuning (Optional)	27
Enter a Transponder Code	27
Selecting a COM Radio	27
Selecting a NAV Radio	28
NAV/COM Tuning	29
Digital Clearance Recorder and Player (Optional)	30
Intercom Volume and Squelch	30
Intercom Modes	31
Passenger Address Mode (PA Mode)	35
Split-PA Mode	36
Automatic Flight Control System	37
GPS Navigation	39
Direct-to Navigation	39
Activate a Stored Flight Plan	40
Activate a Flight Plan Leg	40
Stop Navigating a Flight Plan	41
Vertical Navigation (VNAV)	41
Flight Planning	43
Weight Planning	43
Trip Planning	43
Create a User Waypoint Defined by Latitude & Longitude	45
Create a User Waypoint Defined by Radials from Other Waypoints	46
Create a User Waypoint Defined by a Radial & Distance from Another Waypoint	48
Delete a User Waypoint	49
Create a Flight Plan	50
Import a Flight Plan from an SD Card	51
Insert a Waypoint in the Active Flight Plan	51
Enter an Airway in a Flight Plan	52
Invert An Active Flight Plan	53
Remove a Departure, Arrival, Approach, or Airway from a Flight Plan	53
Store a Flight Plan	54
Edit a Stored Flight Plan	54
Delete a Waypoint from the Flight Plan	54
Invert and Activate a Stored Flight Plan	55
Copy a Flight Plan	55
Delete a Flight Plan	55
Graphical Flight Plan Creation	56
Export a Flight Plan to an SD Card	56
Procedures	57
Load and Activate a Departure Procedure	57
Activate A Departure Leg	57
Load An Arrival Procedure	57
Activate An Arrival Leg	58
Load and/or Activate an Approach Procedure	58
Activate An Approach in the Active Flight Plan	59
Activate a Vector to Final Approach Fix	60
Activate A Missed Approach in the Active Flight Plan	60
Hazard Avoidance	61
Customizing the Hazard Displays on the Navigation Map	61
XM Weather (Optional)	61
Traffic Systems	64
Terrain Awareness & Warning System (HTAWS) Display	66
Additional Features	71
Synthetic Vision	71
Terminal Procedure Charts	72
AOPA Airport Directory	74
Satellite Telephone and Data Link Services (Optional)	75
System Data Logging (Optional)	89
XM® Radio Entertainment (Optional)	90
Auxiliary Video (Optional)	92
Abnormal Operation	95
Reversionary Mode	95
Abnormal COM Operation	95
Hazard Displays with Loss of GPS Position	95
Unusual Attitudes	96
Dead Reckoning	97
Annunciations & Alerts	99
Warning Messages	99
Caution Messages	99
Advisory Messages	101
Safe Operating Annunciation	101
HTAWS Alerts	102
HTAWS System Status Annunciations	103
Voice Alerts	104
MFD & PFD Message Advisories	105
Database Message Advisories	106
GMA 350H Message Advisories	108
GIA 63H Message Advisories	109
GEA 71H Message Advisories	111
GTX 33H Message Advisories	112
GRS 77H Message Advisories	112
GMU 44 Message Advisories	113
GSR 56H Message Advisories	113
GDL 59H Message Advisories	113
GDL 69AH Message Advisories	114
GDC 74H Message Advisories	114
GTS 800 Message Advisories	115
Miscellaneous Message Advisories	115
Flight Plan Import/Export Messages	119
Appendix	121
PFD Softkey Map	121
MFD Softkey Map	126
Loading Updated Databases	128

Match case Limit results 1 per page

Garmin G1000H

™

Cockpit Reference Guide for the Bell 407GX

190-01254-00

Rev. A

Additional Features

Flight

Instruments

EICAS

Nav/Com/

XPDR/Audio

AFCS

GPS Nav

Flight

Planning

Procedures

Hazard

Avoidance

Additional

Features

Abnormal

Operation

Annun/

Alerts

Appendix

Index

To save and connect the selected network:

Press the

ENT

Key.

A checkmark is placed in the checkbox and the

cursor moves to the airport ﬁeld.

Using the

FMS

Knobs, enter an airport identiﬁer to be associated with

the saved network.

This aids in identifying the network later in the

event of duplicate network names.

Press the

ENT

Key.

The cursor moves to ‘CONNECT’.

Press the

ENT

Key again to connect to the selected network.

Editing a Saved Network

While viewing list of saved networks, press the

FMS

Knob to activate the

cursor.

Turn either

FMS

Knob to highlight the network to be edited.

Pressing the

ENT

Key at this point will check or uncheck the AUTO

CONNECT checkbox.

When a checkmark is present, the system will

automatically connect to the network when within range.

Press the

EDIT

Softkey.

The cursor now appears in the CONNECTION

SETTINGS window.

Turn the large

FMS

Knob to select the network attribute to be edited.

Turn the small

FMS

Knob to begin editing the ﬁeld.

When the entry is complete, press the

ENT

Key.

Turn the large

FMS

Knob or press the

ENT

Key until ‘SAVE’ is highlighted.

Press the

ENT

Key.

Disconnecting a Wi-Fi Network

Press the

DISCNCT

Softkey.

Deleting a Saved Wi-Fi Network

While viewing the list of saved networks, press the

FMS

Knob to activate

the cursor.

Turn either

FMS

Knob to highlight the network to be deleted.

Press the

DELETE

Softkey.

The selected network is removed from the list.