Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 46

Create a User Waypoint Defined by Radials from Other Waypoints

Get Garmin G1000H PDF manuals and user guides View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Flight Planning 6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint can be made temporary (deleted automatically when the system is turned off). If the waypoint is to remain in the system, proceed to step 7. a) Turn the large FMS Knob one click to the left to highlight 'TEMPORARY'. b) Press the ENT Key to place a check-mark in the box. Turn the large FMS Knob to place the cursor back in the 'WAYPOINT TYPE' field. 7) With the cursor in the 'WAYPOINT TYPE' field, turn the small FMS Knob to display a list of waypoint types. 8) Turn the small FMS Knob to select LAT/LON (latitude and longitude). 9) Press the ENT Key. CREATE A USER WAYPOINT DEFINED BY RADIALS FROM OTHER WAYPOINTS 1) Turn the large FMS Knob on the MFD to select the 'WPT' page group. 2) Turn the small FMS Knob to select the User WPT Information Page. 3) Press the NEW Softkey. A waypoint is created at the current aircraft position. 4) Enter the desired waypoint name. 5) Press the ENT Key. 6) The cursor is now in the 'WAYPOINT TYPE' field. If desired, the waypoint can be made temporary (deleted automatically when the system is turned off). If the waypoint is to remain in the system, proceed to step 7. a) Turn the large FMS Knob one click to the left to highlight 'TEMPORARY'. b) Press the ENT Key to place a check-mark in the box. Turn the large FMS Knob to place the cursor back in the 'WAYPOINT TYPE' field. 7) With the cursor in the 'WAYPOINT TYPE' field, turn the small FMS Knob to display a list of waypoint types. 8) Turn the small FMS Knob to select RAD/RAD (radial/radial). 9) Press the ENT Key. 10) The cursor moves to the 'REFERENCE WAYPOINTS' field. With the first Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 30 Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX
190-01254-00
Rev. A
30
Flight Planning
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts
Appendix
Index
6)
The cursor is now in the ‘WAYPOINT TYPE’ field.
If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off).
If the waypoint is to remain in the system, proceed to step 7.
a)
Turn the large
FMS
Knob one click to the left to highlight
‘TEMPORARY’.
b)
Press the
ENT
Key to place a check-mark in the box.
Turn the large
FMS
Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.
7)
With the cursor in the ‘WAYPOINT TYPE’ field, turn the small
FMS
Knob to
display a list of waypoint types.
8)
Turn the small
FMS
Knob to select LAT/LON (latitude and longitude).
9)
Press the
ENT
Key.
CREATE A USER WAYPOINT DEFINED BY RADIALS FROM OTHER WAYPOINTS
1)
Turn the large
FMS
Knob on the MFD to select the ‘WPT’ page group.
2)
Turn the small
FMS
Knob to select the User WPT Information Page.
3)
Press the
NEW
Softkey.
A waypoint is created at the current aircraft
position.
4)
Enter the desired waypoint name.
5)
Press the
ENT
Key.
6)
The cursor is now in the ‘WAYPOINT TYPE’ field.
If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off).
If the waypoint is to remain in the system, proceed to step 7.
a)
Turn the large
FMS
Knob one click to the left to highlight
‘TEMPORARY’.
b)
Press the
ENT
Key to place a check-mark in the box.
Turn the large
FMS
Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.
7)
With the cursor in the ‘WAYPOINT TYPE’ field, turn the small
FMS
Knob to
display a list of waypoint types.
8)
Turn the small
FMS
Knob to select RAD/RAD (radial/radial).
9)
Press the
ENT
Key.
10)
The cursor moves to the ‘REFERENCE WAYPOINTS’ field.
With the first