Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 59

Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Procedures 3) Press the ENT Key. A list of available approaches for the destination airport is displayed. 4) Turn either FMS Knob to highlight the desired approach. 5) Press the ENT Key. A list of available transitions for the selected approach procedure is now displayed. 6) Turn either FMS Knob to select the desired transition. The "Vectors" option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course. 7) Press the ENT Key. The cursor moves to the MINIMUMS field. 8) If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. 9) Press the ENT Key. The cursor moves to the altitude field. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure. 10) Press the ENT Key. 'LOAD? or ACTIVATE?' is now displayed with 'LOAD?' highlighted. 11) Turn the large FMS Knob to select either 'LOAD?' or 'ACTIVATE?'. Selecting 'LOAD?' enters the selected approach procedure into the active flight plan, but is not currently active. Selecting 'ACTIVATE?' enters the selected approach procedure into the active flight plan and activates the first leg of the approach. 12) Press the ENT Key. ACTIVATE AN APPROACH IN THE ACTIVE FLIGHT PLAN 1) Press the PROC Key. 2) Turn the large FMS Knob to highlight 'ACTIVATE APPROACH'. 3) Press the ENT Key. Flight Planning Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 190-01254-00 Rev. A Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 43