Garmin G1000H Bell 407GX Cockpit Reference Guide - Page 87

Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Additional Features WI-FI CONNECTIONS (OPTIONAL) Control and monitoring of Wi-Fi functions are accomplished through the AUXWI-FI SETUP Page. Viewing the Wi-Fi Setup Page 1) Turn the large FMS Knob on the MFD to select the AUX page group. 2) Turn the small FMS Knob to select REPORTS/DATA LINK. 3) If necessary, press the WI-FI Softkey to display the AUX-WI-FI SETUP Page. Setting Up a New Wi-Fi Connection 1) Press the AVAIL Softkey on the MFD. A list of available networks will be displayed in the AVAILABLE NETWORKS window. Signal strength is shown for each network, as well as security methods and whether the network has been saved in the system's memory. 2) If necessary, press the RESCAN Softkey to have the system scan again for available networks. 3) Press the FMS Knob to place the cursor in the list of networks. 4) Turn either FMS Knob to select the desired network. 5) Press the CONNECT Softkey. 6) If the network is secured, enter the necessary passcode. Use the FMS Knobs to enter the desired alpha numeric characters. Press the CAP LOCK Softkey to enter upper case letters. If there is no security associated with the network, proceed to step 9. 7) Press the ENT Key. 'OK' will be highlighted. 8) Press the ENT Key again. 9) The SAVE SETTINGS window is now displayed with the cursor highlighting 'SAVE CONNECTION'. 10) The selected network can be saved to system memory to make reconnection easier at a later time. To connect the selected network without saving: a) Turn the large FMS Knob to move the cursor to highlight 'CONNECT'. b) Press the ENT Key. Procedures Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 190-01254-00 Rev. A Garmin G1000H™ Cockpit Reference Guide for the Bell 407GX 71