Garmin GPSMAP 67 Owners Manual - Page 19
Projecting a Waypoint from a Saved Waypoint, Moving a Waypoint on the Map
![]() |
View all Garmin GPSMAP 67 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Projecting a Waypoint from a Saved Waypoint You can save a new waypoint by projecting the distance and bearing from a saved waypoint to a new location. 1 Press MENU twice to open the main menu. 2 Select Waypoint Manager. 3 Select a waypoint. 4 Press MENU. 5 Select Project Waypoint. 6 Enter the bearing, and select Done. 7 Select a unit of measure. 8 Enter the distance, and select Done. 9 Select Save. Moving a Waypoint on the Map 1 Press MENU twice to open the main menu. 2 Select Waypoint Manager. 3 Select a waypoint. 4 Press MENU. 5 Select Move Waypoint. 6 Press , , , or to move the cursor to a new location on the map. 7 Select Move. Finding a Location Near a Waypoint 1 Press MENU twice to open the main menu. 2 Select Waypoint Manager. 3 Select a waypoint. 4 Press MENU. 5 Select Find Near Here. 6 Select a category. The list displays locations near the selected waypoint. Setting a Waypoint Proximity Alarm You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range of a particular location. 1 Press MENU twice to open the main menu. 2 Select Waypoint Manager. 3 Select a waypoint. 4 Press MENU. 5 Select Set Proximity. 6 Enter the radius. When you enter an area with a proximity alarm, the device sounds a tone. Navigation 13
![](/manual_guide/products/garmin-gpsmap-67-owners-manual-9c87c30/19.png)