Gateway 7400 System Manual (PDF Version) - Page 44
documentation for jumper settings.
View all Gateway 7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
8 Remove the new hard drive from the static-free container and place it in the filler tray with the top (label side) up and the connectors facing away from the plastic face plate. 9 Set the drive jumpers to the appropriate settings (refer to your drive documentation for jumper settings.) 10 Install the drive in the filler tray with four screws (6-32 x 1/4-inch Phillips head - not provided). 36 Replacing and Adding System Components
36
Replacing and Adding System Components
8
Remove the new hard drive from the static-free container and place it
in the filler tray with the top (label side) up and the connectors facing
away from the plastic face plate.
9
Set the drive jumpers to the appropriate settings (refer to your drive
documentation for jumper settings.)
10
Install the drive in the filler tray with four screws (6-32 x 1/4-inch Phillips
head - not provided).