GE PT960DPBB Owners Manual - Page 5

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support Introduction to the oven controls. (Throughout this manual, features and appearance may vary from your model.) GEAppliances.com Touch Screen Touch the graphics on the interactive display to use the oven features. SELECT COOK MODE BAKE CONVECTION BAKE BROIL CONVECTION ROAST FAVORITE RECIPE KITCHEN TIMER PROBE SELF CLEAN HOME OVEN LIGHT HELP OPTIONS BACK OVEN LIGHT CLEAR OFF 3 SEC Double oven control shown. Touch Screen, Touch Pads and Time of Day Display NOTE: If the oven is inactive for 10 minutes, the Touch Screen will go into standby mode, and the screen will be dark. Touch the Touch Screen or any pad to "wake up" the display. The Display may also "wake up" when it senses you (your hand) approaching the Touch Screen. The display is sensitive and may "wake up" when lights are turned on or due to the movement of nearby people or objects. The Display should return to its standby mode after 10 minutes if no further interaction occurs. Touch Screen BAKE Touch to select the bake function. BROIL Touch to select the broil function (HIGH BROIL or LOW BROIL) or the BROIL GUIDE. FAVORITE RECIPE Touch to use, create, rename, modify or delete a favorite recipe. PROBE Touch when using the probe to cook food. CONVECTION BAKE Touch to select baking with the convection function. CONVECTION ROAST Touch to select roasting with the convection function. KITCHEN TIMER Touch to select the timer feature. SELF CLEAN Touch to select the self-cleaning function. See the Using the Self-Cleaning Oven section. Touch Pads HOME Pad Touch to return to the "SELECT COOK MODE" (Home) Screen. This does not cancel any cooking or self-clean settings. HELP Pad Touch this pad to find out more about your oven's features. BACK Pad Touch to return to the previous screen. CLEAR/OFF Pad Touch to cancel ALL oven operations except the clock and timer. OVEN LIGHT On/Off Pad(s) Touch to turn the oven light(s) on or off. OPTIONS Pad Touch to select TWO TEMPS, DELAY START, PROOF, DEHYDRATE, WARM, COOK & HOLD, SABBATH or SETTINGS. Display Display Shows the time of day. Error Codes If "F- and a number or letter" flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service. If there has been a power outage: If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset. The time of day will flash in the display when there has been a power outage. 5