Harman Kardon AVR 1700 Quick Start Guide - Page 6

Connect Your Home Network, Connect the Radio Antennas - owner s manual

Page 6 highlights

AVR Connections Analog Audio Devices Use the AVR's analog audio connectors for source devices that don't have HDMI or digital audio connectors. AVR Analog Audio Connectors Video Recorders Connect an analog video recorder's video input connector to the AVR's Composite Monitor Out connector. You can record any composite video signal. To record the audio and video from the source device, connect the AVR's Analog Rec Out connectors to the analog video recorder's audio inputs. NOTE: If you have connected the AVR's Composite Monitor Out video connector to your TV you cannot connect a VCR to the AVR for recording. AVR Analog Audio Recorder Connectors AVR Analog Video Recorder Connectors Stereo Audio Cable (not supplied) Analog Audio/Video Cable (not supplied) To Analog Audio/Video Record Inputs To Stereo Analog Audio Output Analog Source Device Audio Recorders Connect an analog audio recorder's inputs to the AVR's analog audio Rec Out connectors. You can record any analog audio input signal. AVR Analog Audio Recorder Connectors Analog Video Recording Device Connect Your Home Network Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR's Network connector to your home network to enjoy Internet radio and content from DLNA®-compatible devices that are connected to the network. AVR Network Connector Network Modem Cat. 5/5E Cable (not supplied) To Home Network and Internet Stereo Audio Cable (not supplied) To Stereo Analog Record Outputs Analog Recording Device Connect the Radio Antennas • C onnect the supplied FM antenna to the AVR's FM 75Ω antenna connector. For the best reception, extend the FM antenna as far as possible. • Bend and fold the base of the supplied AM antenna as shown and connect the antenna wires to the AVR's AM and Gnd connectors. Rotate the antenna as necessary to maximize reception quality. AVR Antenna Connectors AM Antenna (supplied) FM Antenna (supplied) Bend and fold base NOTE: To connect RS-232, remote IR and trigger equipment, please download the AVR 1700, AVR 170, AVR 170/230C Owner's Manual from www.harmankardon.com. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

Connections
AVR
Analog Audio Devices
Use the AVR’s analog audio connectors for source devices that don’t have HDMI or digital
audio connectors.
AVR Analog
Audio Connectors
To Stereo Analog
Audio Output
Stereo Audio Cable
(not supplied)
Analog Source Device
Audio Recorders
Connect an analog audio recorder’s inputs to the AVR’s analog audio Rec Out connectors.
You can record any analog audio input signal.
Stereo Audio Cable
(not supplied)
To Stereo Analog
Record Outputs
Analog Recording Device
AVR Analog Audio
Recorder Connectors
Video Recorders
Connect an analog video recorder’s video input connector to the AVR’s Composite Monitor
Out connector. You can record any composite video signal. To record the audio and video
from the source device, connect the AVR’s Analog Rec Out connectors to the analog video
recorder’s audio inputs. NOTE: If you have connected the AVR’s Composite Monitor Out
video connector to your TV you cannot connect a VCR to the AVR for recording.
AVR Analog Audio
Recorder Connectors
AVR Analog Video
Recorder Connectors
Analog Audio/Video Cable (not supplied)
To Analog Audio/Video Record Inputs
Analog Video Recording Device
Connect Your Home Network
Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR’s Network connector to your
home network to enjoy Internet radio and content from DLNA
®
-compatible devices that are
connected to the network.
Network
Modem
AVR
Network
Connector
Cat. 5/5E Cable
(not supplied)
To Home
Network
and
Internet
Connect the Radio Antennas
• Connect the supplied FM antenna to the AVR’s FM 75
Ω
antenna connector. For the best
reception, extend the FM antenna as far as possible.
• Bend and fold the base of the supplied AM antenna as shown and connect the antenna
wires to the AVR’s AM and Gnd connectors. Rotate the antenna as necessary to maximize
reception quality.
AM Antenna
(supplied)
Bend and fold base
AVR
Antenna
Connectors
FM Antenna (supplied)
NOTE: To connect RS-232, remote IR and trigger equipment, please download the
AVR 1700,
AVR 170, AVR 170/230C Owner’s Manual
from www.harmankardon.com.
6