Harman Kardon AVR 1700 Quick Start Guide - Page 7
Connect to AC Power, Set Up the AVR - harman
View all Harman Kardon AVR 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English AVR Connections Connect to AC Power Connect the AC power cord to the AVR's AC Input connector and then to a working, non-switched AC power outlet. IMPORTANT: Before connecting the AC power cord, make sure that the AC voltage listed on the AVR's back panel matches the AC voltage used in your country. AVR AC Input Connector Configure the AVR for Your Speakers One of the most important steps in setting up a home theater system is to calibrate the AVR to match your loudspeakers, optimizing sound reproduction. Your AVR features the Harman Kardon EzSet/EQ™ system, which performs this calibration automatically using the supplied EzSet microphone. You will be using the following remote cotnrol buttons to configure your AVR: OK Button Left/Right/Up/Down Buttons CLR SleepGuide Night RDS MEM Tone Delay LastBack Audio Radio USB Network Server Aux Game STB Disc AC Power Outlet Options Cable /Sat Direct Power Cord (supplied) OSD Set Up the AVR Install the Batteries in the Remote Control Remove the remote control's battery cover, insert the three supplied AAA batteries as shown in the illustration, and replace the battery cover. AVR Button Back Button OSD Button 1. Plug the supplied EzSet/EQ™ microphone into the AVR's Headphone connector. AVR Headphone Connector NOTE: Remove the protective plastic from the AVR's front panel so it doesn't reduce the remote control's effectiveness. Turn On the AVR 1. Set the rear-panel Main Power switch to "On." (The front-panel Power indicator will glow amber.) 2. Press the front-panel Power button. Main Power Switch Power Button EzSet Microphone (supplied) 2. Place the microphone at ear height in your listening position. 3. Turn on your TV and select the TV input where you connected the AVR in Connect Your TV, on page 3. 4. Press the remote control's AVR button, then press the OSD button. The AVR's on-screen display (OSD) Master Menu will appear on the TV. (Note: If you have only used a composite video connection to your TV, the OSD menus will not appear on your TV. Follow the steps below using the receiver's front-panel display.) MASTER MENU Source Select Source Setup Surround Mode EzSet/EQ Manual Setup Network System Setup 7