Hayward Variable Speed Pump Technical Guide - Page 16

Installation, Remote Stop Switch

Get Hayward Variable Speed Pump PDF manuals and user guides View all Hayward Variable Speed Pump manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installation-Remote Stop Switch 1. One side of the 24 VAC on the pump terminal needs to be wired to 8 on the pump terminal as shown (fig 29). 2. Terminal 7 on the pump terminal and the other leg of the 24 VAC on the pump terminal need to be wired to the emergency switch (fig 29). Note: The emergency switch needs to be a latching style that is normally open (NO). Some switches have wiring for both NO and NC (normally Closed). Refer to the e-switch for its internal wiring. When the switch is pressed the 24v circuit is completed and the pump will shut down operation. Remote stop switch purchased separately Fig 29 Page 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Installation
–
Remote Stop Switch
1.
One side of the 24 VAC
on the pump terminal
needs to be wired to
8
on the pump terminal
as
shown
(fig 29).
2.
Terminal
7
on the pump terminal and the
other leg
of the 24 VAC on the pump terminal need to be
wired to the emergency switch
(fig 29).
Note:
The emergency switch needs to be a latching style
that is normally open (NO).
Some switches have wiring for
both NO and NC (normally Closed). Refer to the e-switch
for its internal wiring.
When the switch is pressed the 24v
circuit is completed and the pump will shut down operation.
Page 14
Fig 29
Remote stop switch
purchased separately