Hayward Variable Speed Pump Technical Guide - Page 17
Programming, User Interface
View all Hayward Variable Speed Pump manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Programming - User Interface PRESET SPEEDS 4 buttons that can be programmed to run at a pre-determined speed for a certain length of time. LED illuminates when favorite speed is selected. Default settings: Speed 1 1000 RPM 29% Speed 2 1750 RPM 51% Speed 3 2500 RPM 72% Speed 4 3250 RPM 94% Display Screen Fig 30 MENU/NAVIGATION BUTTONS The button will scroll through the setup menus when pressed. The & arrow buttons are used to move between displays and to select parameters to edit when in a specific setup menu. The & buttons are used to change the parameters. STOP /RESUME When pressed it will stop the pump for maintenance, end a favorite speed choice or end quick clean. Pressed again the pump will resume normal operations. LED will illuminate indicating the pump has stopped. CHECK SYSTEM LED LED will illuminate solid when there is an error condition. It will blink when in the quick clean mode with the SVRS models. TIMERS ACTIVE LED LED will illuminate once the timers have been programmed., even if the pump is not running. QUICK CLEAN Elevates the speed of the pump to max set speed for cleaning. Places SVRS in unprotected mode if included with pump (1 hour default timer). Unprotected mode requires manual verification. Page 15