HP 11622 HP Rack Options Installation Guide for the 11000 G2 Series Rack and t - Page 27
Using two T-30 Torx screws in each bracket, attach three baying brackets either 24-inch or 600-mm
View all HP 11622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1. Remove the front and rear doors. 2. Remove the side panels (if present between the racks). 3. Position the racks side by side, ensuring that the feet of the racks are on solid flooring (no cracks or openings). 4. Using two T-30 Torx screws in each bracket, attach three baying brackets (either 24-inch or 600-mm, depending on the floor layout) to the front and rear of each rack set. Baying kit 27
Baying kit 27
1.
Remove the front and rear doors.
2.
Remove the side panels (if present between the racks).
3.
Position the racks side by side, ensuring that the feet of the racks are on solid flooring (no cracks or
openings).
4.
Using two T-30 Torx screws in each bracket, attach three baying brackets (either 24-inch or 600-mm,
depending on the floor layout) to the front and rear of each rack set.