HP 11622 HP Rack Options Installation Guide for the 11000 G2 Series Rack and t - Page 61
Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt
View all HP 11622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
b. Insert and partially tighten four M8 x16-mm bolts with washers, securing the front stabilizer mount to the front caster plate. c. Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt, securing the front stabilizer mount to the front caster plate. d. Tighten the bolts from step b. e. Tighten the bolts from step c. Heavy Duty Stabilizer kit 61
Heavy Duty Stabilizer kit
61
b.
Insert and partially tighten four M8 x16-mm bolts with washers, securing the front stabilizer mount
to the front caster plate.
c.
Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt,
securing the front stabilizer mount to the front caster plate.
d.
Tighten the bolts from step b.
e.
Tighten the bolts from step c.