HP 1510 User Guide - Page 26

Use the copy features 6 Use the copy features The HP All-in-One allows you to produce high-quality color and black-and-white copies on a variety of paper types. You can enlarge or reduce the size of an original to fit a specific paper size, adjust the copy quality, and make high-quality copies of photos, including borderless copies. This chapter provides instructions for increasing copy speed, enhancing copy quality, setting the number of copies to print, and guidelines for choosing the best paper type for your job. Tip For the best copy performance on standard copy projects, set the paper type to Plain Paper and the copy quality to Fast. For information on setting the paper type, see Set the copy paper type. For information on setting the copy quality, see Increase copy speed or quality. Set the copy paper type You can set the paper type on your HP All-in-One to either Plain Paper or Photo Paper. To set the paper type from the control panel 1. Make sure you have paper loaded in the paper tray. 2. Load your original face down on the right front corner of the glass. 3. Press the Type button to select either Plain Paper or Photo Paper. 4. Press Start Copy Black or Start Copy Color. Refer to the following table to determine which paper type setting to choose based on the paper loaded in the paper tray. Paper type Copier paper or letterhead HP Bright White Paper HP Premium Plus Photo Paper, Glossy HP Premium Plus Photo Paper, Matte HP Premium Plus 4 x 6 inch Photo Paper HP Photo Paper HP Everyday Photo Paper HP Everyday Photo Paper, Semi Gloss Other photo paper HP Premium Paper Control panel setting Plain Plain Photo Photo Photo Photo Photo Photo Photo Plain User Guide 23