HP 8100C HP Digital Sender 8100C - (English) Administrator Guide, C7707-90006 - Page 29
Network Menu, MANUAL
View all HP 8100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
27 Configuration parameters on the control panel (continued) Parameter Description User self-registration Permission for users to create their own user profile. If disabled, enabled only the administrator can add or change user profiles. Network Menu IP Configurati o To specify how the digital sender network interface car obtains itsTCP/IP configuration. Choi c e s MANUAL. From the control panel. BOOTP (Boot Protocol) or DHCP (Dynamic Host Configuration Protocol). Automatically from the network (the IP Address, IP Subnet Mask, and IP Gateway parameters are ignored). A corresponding server must be running and properly configured. The next time you open the configuration menu, you see the values that the network interface card automatically discovered. See "Assigning an IP address to the digital sender" on page 17 for details. Two things happen if you configured the IP address using BOOTP or DHCP and later change the IP address at the control panel: (1) the IP address that was assigned is released and (2) the setting for this parameter changes to MANUAL. Changing this value causes the digital sender to shut down and restart. IP Address UniqueTCP/IP network address of the HPJetDirect print server (network interface card) in the digital sender. Required for the digital sender to work. CLEAR sets the address to 0.0.0.0. Changing this value causes the digital sender to shut down and restart. IP Subnet Ma s The filter used to identify the subnet of the network interface card in the digital sender. CLEAR sets the address to 0.0.0.0. Changing this value causes the digital sender to shut down and restart. IP Gateway IP address of the gateway server used to send packets off the local network. CLEAR sets the address to 0.0.0.0. Changing this value causes the digital sender to shut down and restart.