HP 8100C HP Digital Sender 8100C - (English) Administrator Guide, C7707-90006 - Page 38
Log Server Addr., HPJetDirect Cfg., HPJetDirect Timeou, HPJetDirect ID, Boot BlockVer, Multi-BootVer - service manual
View all HP 8100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
36 Revision page parameters (continued) Parameter Descriptions Log Server Addr. IP address of the host computer that receives syslog messages from the HPJetDirect print server. HPJetDirect Cfg. HPJetDirect Timeou Indicates how the digital sender has received its TCP/IP configuration: DHCP Automatically from a DHCP server MANUAL Manually from entries made at the control panel. Timeout value in seconds that an idle data connection is allowed to remain open.Valid values are 0 to 3600. A value of 0 disables the timeout mechanism. The default is 90 seconds. HPJetDirect ID HP manufacturing identification code assigned to the network interface card. Boot BlockVer . Multi-BootVer . Version of the digital sender startup (boot) program. This information is used only by HP manufacturing and HP customer support. Version of the digital sender multi-boot program. This information is used only by HP manufacturing and HP customer support. Engine FW Ver. Version of firmware used by the digital sender scanner engine. This information is used only by HP manufacturing and HP customer support. Running Imag e The firmware image currently running. Either 1 or 2. The Tasks page lists the services running on the digital sender at that moment. Each task is assigned a Status, Error Number (Errno), and State (St). Tasks cannot be modified or deleted and are diagnostic tools that may be referred to by HPTechnical Support staff. 1 At the control panel, press STATUS (ALT+F3). 2 Press TASKS (F2).