HP 9050dn HP LaserJet 9050 - Software Technical Reference (External) - Page 147

Configuring the trays 1 Select the appropriate tray from the Available Trays drop-down menu. 2 Use the This Tray Contains/Size (Forms) drop-down menu to select the media size (or form) that is loaded in that tray. 3 Use the This Tray Contains/Type drop-down menu to select the media type that is configured for the tray. 4 Repeat steps 1 through 3 for the remaining trays. 5 Click OK to enable your settings, or, if necessary, click the Clear All button to reconfigure all of the trays, and remove the size and type constraints that have been imposed on the Paper tab. Configure tab features NOTE The Configure tab is in the Properties for the print driver. To gain access to the Properties tabs, click Start on the Window task bar, click Settings, and then click Printers. Right-click the product name, and then click Properties. Use the Configure tab to tell the driver about the product hardware configuration. If bidirectional communication is enabled in a supported environment, set up this tab by clicking the Update Now button. If your environment does not support bidirectional communication, the Update Now button is unavailable, so you must manually configure the options on this tab. The Configure tab is available when the driver is opened from the Printers folder by clicking Properties. When you open the driver from within a program, the Configure tab is not visible (with a HP traditional print drivers for Windows HP traditional PCL 6 and PCL 5e driver features 131