HP 910 User Guide - Page 79
Paper problems, Cause, Solution, To remove plastic tape from a print cartridge
View all HP 910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
a refilled or remanufactured print cartridge, or a cartridge that has been used in another printer, the ink level indicator will be inaccurate or unavailable. For information on how to replace print cartridges, see Replace print cartridges. "Printing in ink-backup mode" message Cause: When the printer detects that only one print cartridge is installed, ink-backup mode is initiated. This printing mode lets you print with a single print cartridge, but it slows the printer and affects the quality of printouts. Solution: If you receive the ink-backup mode message and two print cartridges are installed in the printer, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the printer cannot detect that the print cartridge is installed. To remove plastic tape from a print cartridge ▲ Hold the print cartridge so that the copper strips are on the bottom and facing toward the printer, and then carefully remove the plastic tape. 1 Remove plastic tape CAUTION: Do not touch the print cartridge ink nozzles or copper contacts. Touching these parts will result in clogs, ink failure, and bad electrical connections. Do not remove the copper strips. They are required electrical contacts. Paper problems To clear a paper jam or resolve other paper problems, check the following topics: • Paper jam • Printer does not feed paper • Out-of-paper message • Printer prints on multiple sheets at once Paper problems 77 Troubleshooting