HP CM1017 HP Color LaserJet CM1015/CM1017 MFP Series - Software Technical Refe - Page 103

● Midtones. Midtone colors are about halfway between white and solid density. To make midtone colors darker, use a positive midtone setting, and to make midtone colors lighter use a negative highlight setting. This adjustment does not affect highlight or shadow colors. ● Shadows. Shadow colors are colors near solid density. To make shadow colors darker, use a positive shadow setting, and to make shadow colors lighter use a negative shadow setting. This adjustment does not affect highlight or midtone colors. Paper Types Use the Paper Types screen to configure the standard print modes that correspond to the various paper types. Software description Figure 2-60 Paper Types screen A print mode is a special setting that controls the print speed and the fuser temperature of the MFP. The product speed and fuser temperature are adjusted to match the print mode that selected, which can result in better print quality when printing on certain media types. NOTE Not all of the paper types listed in the driver can be adjusted from the Paper Types screen. The following table shows the paper types that the HP Color LaserJet CM1015 MFP/CM1017 MFP supports and the default fuser mode for each type. Table 2-2 Standard print modes Standard print modes Extended print modes Color tables Normal Mode None Plain Sensor correlation prefix PlainFull Default paper types Plain, Color, Preprinted, ENWW HP ToolboxFX 81