HP CM1017 HP Color LaserJet CM1015/CM1017 MFP Series - Software Technical Refe - Page 116

Software description The following options are available on the SNMP screen: ● Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the MFP. Custom community names can be configured to control management access to the HP Color LaserJet CM1017 MFP. ● Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the MFP. ● Confirm Set Community name: Retype the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the MFP. ● Get Community name: Type the SNMP Get Community Name (password) to allow SNMP information to be read from the MFP. ● Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow SNMP information to be read from the MFP. ● Disable SNMP v1 default Get Community name of "public". Select this option to disable the default Get community name "public". If selected, type values in the Get Community name and Confirm Get Community name fields. ● Enable SNMP v1 read-only access (uses "public" for the Get Community value). Select this option to enable the SNMP V1 agents on the HP Color LaserJet CM1017 MFP, but limit access to read-only. Write-access is disabled. The default Get Community name "public" is automatically enabled. ● Disable SNMP v1. Select this option to disable the SNMP V1 agents on the HP Color LaserJet CM1017 MFP, which is recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery utilities might not operate properly. NOTE Click Apply to make the changes take effect. NOTE Disabling SNMP can cause the HP Color LaserJet CM1017 MFP to lose functionality for features such as scanning. Network Summary The Network Summary screen provides an overview of the network settings that have been enabled for the HP Color LaserJet CM1017 MFP. 94 Chapter 2 Software description ENWW