HP Color LaserJet 8500 Service Manual - Page 123

3 To replace the transfer kit 1 Open the front door of the printer. 2 Push the white button on the lower (green) lever and swing the lever to the right. 3 Open the upper door on the right side of the printer, and remove the 4 transfer drum. 4 On the right, back wall of the opening, firmly pull the blue knob to release the right end of the cleaning roller. Lift the roller slowly out and to the right to release the left end. CAUTION 7 Do not touch the roller; hold the roller only by the blue knob and left end to avoid print quality problems. 5 While holding the new roller by the blue knob, insert the left end into the hole in the left side of the back wall. 6 Push the right end into its bracket 8 until it snaps into place. 7 Rotate the transfer belt up using the blue lever on the bottom, right side of the printer opening. 8 Using the blue handles, lift the belt up and out of the printer. Note Do not touch the surface of the transfer belt or poor print quality might result. EN Printer consumables 121