HP Color LaserJet 8500 Service Manual - Page 125

15 Hold the new filter by the small 16 handles, and remove the new filter from its packaging. 16 Slide the filter in under the guides in the opening and close the blue filter door, making sure it clicks into place. 17 Close the upper right door. If the door does not close, the drum might not be all the way in the printer. 22 18 In the front of the printer, swing the lower (green) lever to the left, making sure it clicks into place. 19 Close the front door and turn the printer on. The printer control panel should display the message PRESS SELECT IF TRANSFER IS NEW. If it displays the message, go to step 20. If it does not, go to step 21. 20 When the printer control panel displays the message, press SELECT to bring the printer online and reset the transfer drum life count. Then go to step 22. 21 If the printer control panel does not display the message: a. Press MENU until RESETS MENU appears on the printer control panel display. b. Press ITEM until RESET TRANSFER LIFE COUNT appears. c. Press SELECT to reset the transfer drum life count. d. Press GO to bring the printer online. 22 Place the used parts in the packaging from the new ones. See the included recycling guide for recycling information. EN Printer consumables 123