HP D2D110 HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2 - Page 103
Secret, Inactive, string, you must enter the same information on the Web Management Interface. See
View all HP D2D110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
NOTE: If you have used the Secret option on the iSCSI Initiator to enter an authentication string, you must enter the same information on the Web Management Interface. See "iSCSI (Status)" on page 77. 6. On the Discovery tab, enter the IP address of the HP D2D Backup System to add it as a target portal for the host. Do not change the Port; it should be 3260. 7. Target devices have already been configured on the HP D2D Backup System for the host that failed, so they will appear in the list on the Targets tab with a status of Inactive, if you are using the same hostname and iSCSI initiator node name as the host that failed. Otherwise new devices will be configured for this host. You must log on to the appropriate targets for your host. Remember that D2D Backup System 103