HP D2D110 HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2 - Page 80
Administration (Admin), Resetting the password
View all HP D2D110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
WARNING! Before shutting down always ensure that there are no backup or restore jobs in progress and that no future jobs are scheduled to start whilst the system is shut down. If hosts do not automatically reconnect to the HP D2D Backup System when it restarts, you must reconnect manually from the iSCSI Initiator on each host, see "Targets tab" on page 49. Administration (Admin) This page allows you to manage the Administrator's password and amend the date and time settings. When you first log on the Administrator user has a password of Admin. For security reasons, you may wish to change this. • Click Edit to make the fields editable. • Make the required changes and click Update to apply the changes (or Cancel to discard them). Resetting the password If you forget your password, you can reset the HP D2D Backup System as follows: NOTE: Resetting the password will reset the networking settings to the factory defaults and reset the Administrator password to Admin. No user data will be lost. 1. Make sure nobody is using the HP D2D Backup System before you attempt the reset. 2. Press the Power button on the front of the HP D2D Backup System three times in quick succession. Approximately 5 seconds later the HP D2D Backup System will reboot. 3. Use the device discovery tool on the HP StorageWorks CD-ROM to re-configure the network settings of the HP D2D Backup System. 80 The Web Management Interface