HP D2D110 HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2 - Page 34
Selecting the correct screws, Attaching the screws and metal shims
View all HP D2D110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
CAUTION: The Ultrium half-height tape drive allows only 3 mm engagement of the screw into the tape drive. To avoid damage to the tape drive, it is important to use the correct screws, which have a slightly thicker head than general mounting screws, and the metal shims. The shims prevent overtightening of the screws which may cause the drive mounts to sheer. Figure 18 Selecting the correct screws 3. Attach the screws and shims to the tape drive as illustrated (1). Figure 19 Attaching the screws and metal shims 4. Slide the half-height tape drive most of the way into the bay (1) and attach a spare power cable from the server's internal power supply to the power connector on the tape drive. Connect the device cable (SCSI or SAS) to the appropriate ports on the HBA and tape drive (2). NOTE: Please refer to the documentation supplied with your tape drive for more information about cabling. 34 Attaching a physical tape drive (optional)