HP D2D110 HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2 - Page 35
Replacing the access panel and bezel
View all HP D2D110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Figure 20 Installing the internal tape drive (example shows a SCSI tape drive) 5. Slide the tape drive fully into the bay until it is seated securely. Replacing the access panel and bezel 1. Remove the blank plate (1) at the top of the bezel. Figure 21 Removing the blank plate in the bezel 2. Insert the two hooks (1) on the right side of the bezel into the rectangular holes on the chassis. Rotate (2) the bezel into place so that the three tabs on the left side of the bezel snap into the slots on the chassis. D2D Backup System 35
Figure 20 Installing the internal tape drive (example shows a SCSI tape drive)
5.
Slide the tape drive fully into the bay until it is seated securely.
Replacing the access panel and bezel
1.
Remove the blank plate (
1
) at the top of the bezel.
Figure 21 Removing the blank plate in the bezel
2.
Insert the two hooks (
1
) on the right side of the bezel into the rectangular holes on the chassis.
Rotate (
2
) the bezel into place so that the three tabs on the left side of the bezel snap into the
slots on the chassis.
D2D Backup System
35