HP DesignJet T2600 User Guide - Page 133

Vertical black band 20 cm wide, Scanner damages some originals

Page 133 highlights

4. If the problem persists, analyze patterns 4, 13 and 14 of the diagnostic plot. The plot should look like this: If you see an image resembling the incorrect examples below, call your support representative and report an "incorrect paper advance" problem. Vertical black band 20 cm wide Your scanner contains various different CIS modules, each of which covers an area 20 cm (7.9 in) wide. If one of the modules fails, and the scanner hardware check does not detect the failure, you may see a black vertical band, corresponding to the area covered by a single CIS module, in your scanned image or copy. Here is an example: original on the left, scan on the right. The black arrow indicates the scanning direction. Actions 1. Open the lid of the scanner and check that the five CIS modules show blinking red, green and blue lights alternately. If a module is failing, call your support representative and report a "CIS module illumination" error. 2. If all the modules lit up correctly in the previous step, restart the scanner by turning it off and on again. If you find an error message on the front panel during this operation, call your support representative and report the error message. If no error message appears, try repeating your scan. 3. If the problem persists, try to calibrate the scanner as indicated in Calibrate the scanner on page 185. If this operation fails, call your support representative with the error code given on the front panel. If no error code appears, try to repeat your scan. 4. If the problem persists, call your support representative and report a "vertical black band 20 cm wide". ENWW Scanner troubleshooting 125

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256

4.
If the problem persists, analyze patterns 4, 13 and 14 of the diagnostic plot. The plot should look like this:
If you see an image resembling the incorrect examples below, call your support representative and report
an “incorrect paper advance” problem.
Vertical black band 20 cm wide
Your scanner contains various different CIS modules, each of which covers an area 20 cm (7.9 in) wide. If one of
the modules fails, and the scanner hardware check does not detect the failure, you may see a black vertical
band, corresponding to the area covered by a single CIS module, in your scanned image or copy.
Here is an example: original on the left, scan on the right. The black arrow indicates the scanning direction.
Actions
1.
Open the lid of the scanner and check that the five CIS modules show blinking red, green and blue lights
alternately. If a module is failing, call your support representative and report a “CIS module illumination”
error.
2.
If all the modules lit up correctly in the previous step, restart the scanner by turning it off and on again. If
you find an error message on the front panel during this operation, call your support representative and
report the error message. If no error message appears, try repeating your scan.
3.
If the problem persists, try to calibrate the scanner as indicated in
Calibrate the scanner
on page
185
. If this
operation fails, call your support representative with the error code given on the front panel. If no error
code appears, try to repeat your scan.
4.
If the problem persists, call your support representative and report a “vertical black band 20 cm wide”.
ENWW
Scanner troubleshooting
125