HP DesignJet T2600 User Guide - Page 25
Install your printer under Windows, Uninstall the printer software under Windows
View all HP DesignJet T2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
If you accidentally misconfigure the printer's network settings, you can restore the network settings to their factory values from the front panel: tap , then , then Restore factory settings. Then you must restart the printer. This automatically provides a working network configuration for most networks. The printer's other settings remain unchanged. Install your printer under Windows The following instructions apply if you intend to print from software applications using a printer driver. See Printing on page 75 for alternative ways of printing. Before you begin, check your equipment: ● The printer should be set up and on. ● The Ethernet switch or router should be on and functioning correctly. ● The printer and the computer should be connected to the network (see Connect the printer to your network on page 16). Now you can proceed to install the printer software and connect to your printer. Printer software installation 1. Make a note of the printer's host name and IP address from the front panel (see Connect the printer to your network on page 16). 2. Install the printer software from http://www.hp.com/go/DesignJetT2600/drivers, following the software installation instructions. By default, the following driver is installed: ● Non-PostScript printers: The raster driver ● PostScript printers, with Windows 7 or Windows Server 2008R2: The PostScript driver ● PostScript printers, with Windows 8, Windows Server 2012, or later: The PDF driver 3. Once downloaded, open it, and follow on-screen steps. If your computer fails to find any printers on the network, the Printer Not Found window is displayed, which helps you to try to find your printer. If you have a firewall in operation; you may have to disable it temporarily in order to find the printer. You also have the options of searching for the printer by its hostname, IP address or MAC address. Uninstall the printer software under Windows Use the Control Panel to uninstall the software, in the same way as you can uninstall any other software. Install Airprint on Mac OS X Before you begin, check your equipment: ● The printer should be set up and on. ● The Ethernet switch or router should be on and functioning correctly. ● The printer and the computer should be connected to the network (see Connect the printer to your network on page 16). Now you can proceed to install the printer software and connect to your printer. ENWW Configure your printer 17