HP DesignJet T2600 User Guide - Page 89

You can select print-quality options in the following ways: ● In the Windows driver dialog: Go to the Paper/Quality or Paper tab (depending on the driver version) and look at the Print Quality section. If you use Standard Options, you will see a simple slider with which you can select speed or quality. If you use Custom Options or Advanced (depending on the driver version), you will see the more specific options described above. ● Using the front panel: Tap , then Default printing configuration > Print quality. NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front panel. NOTE: You cannot change the print quality of pages that the printer is already receiving or has already received (even if they have not started to print yet). Select paper size The paper size can be specified in the following ways. NOTE: The paper size specified here should be the paper size in which the document was created. It is possible to rescale the document to a different size for printing. See Rescale a print on page 84. ● In the Windows driver dialog: Select the Paper/Quality or Paper tab (depending on the driver version), then select your paper size from the Document Size list. NOTE: If you are printing with the V4 driver and from Adobe Acrobat, the page size and orientation are determined by the application. NOTE: If your application offers no Page Setup dialog, use the Print dialog. ● Using the front panel: tap , then Default printing configuration > Paper options > Paper size. NOTE: If the paper size is set from your computer, it overrides the paper size setting in the front panel. ENWW Advanced print settings 81