HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 35

Hard drive, Remove the hard drive

Get HP ENVY Rove 20-k014us PDF manuals and user guides View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. These components are available in the Hard Drive Hardware Kit, spare part number 728053-001. Description 1-TB, 5400-rpm, 9.5-mm hybrid drive with 8-GB NAND cache 750-GB, 5400-rpm, 9.5-mm hybrid drive with 8-GB NAND cache 1-TB 5400-rpm, 9.5-mm hard drive 750-GB, 5400-rpm 9.5-mm Spare part number 731999-005 732001-001 676521-005 634250-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). Remove the hard drive: 1. Disconnect the battery cable from the system board. 2. Disconnect the hard drive connector cable (1) from the system board. 3. Loosen the two Phillips PM2.5×6.5 screws (2) that secure the hard drive to the computer. Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive connector
cable, or screws. These components are available in the Hard Drive Hardware Kit, spare part number
728053-001.
Description
Spare part number
1-TB, 5400-rpm, 9.5-mm hybrid drive with 8-GB NAND cache
731999-005
750-GB, 5400-rpm, 9.5-mm hybrid drive with 8-GB NAND cache
732001-001
1-TB 5400-rpm, 9.5-mm hard drive
676521-005
750-GB, 5400-rpm 9.5-mm
634250-005
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
5.
Remove the rear cover (see
Rear cover
on page
26
).
Remove the hard drive:
1.
Disconnect the battery cable from the system board.
2.
Disconnect the hard drive connector cable
(1)
from the system board.
3.
Loosen the two Phillips PM2.5×6.5 screws
(2)
that secure the hard drive to the computer.
Component replacement procedures
27