HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 40

USB board, computer on, and then shut it down through the operating system.

Get HP ENVY Rove 20-k014us PDF manuals and user guides View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

2. Detach the RTC battery (2) from the middle frame. (The RTC battery is attached to the middle frame with double-sided adhesive.) 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. USB board NOTE: The USB board spare part kit does not include the USB board ribbon cable. The USB board ribbon cable is included in the Cable Kit, spare part number 728048-001. See Cable Kit on page 12 for more Cable Kit information. Description USB board Spare part number 728064-001 Before removing the USB board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). 6. Disconnect the battery cable (see Hard drive on page 27). 32 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
2.
Detach the RTC battery
(2)
from the middle frame. (The RTC battery is attached to the middle
frame with double-sided adhesive.)
3.
Remove the RTC battery.
Reverse this procedure to install the RTC battery.
USB board
NOTE:
The USB board spare part kit does not include the USB board ribbon cable. The USB board
ribbon cable is included in the Cable Kit, spare part number 728048-001. See
Cable Kit
on page
12
for more Cable Kit information.
Description
Spare part number
USB board
728064-001
Before removing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
5.
Remove the rear cover (see
Rear cover
on page
26
).
6.
Disconnect the battery cable (see
Hard drive
on page
27
).
32
Chapter 4
Removal and replacement procedures