HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 59
Air flow channel, Remove the air flow channel
View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Air flow channel Description Air flow channel Spare part number 728052-001 Before removing the air flow channel, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). 6. Disconnect the battery cable (see Hard drive on page 27). 7. Remove the hard drive (see Hard drive on page 27). 8. Remove the cover bracket (see X-axis capacitor board on page 33). 9. Remove the display stand recess (see Display stand recess on page 41). Remove the air flow channel: 1. Detach the mylar shroud (1) that connects the air flow channel to the fan. 2. Remove the Phillips PM3.0×6.5 screw (2) that secures the air flow channel to the middle frame. 3. Remove the air flow channel (3). Reverse this procedure to install the air flow channel. Component replacement procedures 51