HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 54
Webcam/microphone module, Remove the display stand recess see
View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Webcam/microphone module NOTE: The webcam/microphone module spare part kit does not include the webcam/microphone module cable. The webcam/microphone module cable is included in the Cable Kit, spare part number 728048-001. See Cable Kit on page 12 for more Cable Kit information. Description Webcam/microphone module (includes double-sided adhesive and grounding tape) Spare part number 728078-001 Before removing the webcam/microphone module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). 6. Disconnect the battery cable (see Hard drive on page 27). 7. Remove the hard drive (see Hard drive on page 27). 8. Remove the cover bracket (see X-axis capacitor board on page 33). 9. Remove the display stand recess (see Display stand recess on page 41). 10. Remove the battery (see Battery on page 44). Remove the webcam/microphone module: 1. Release the grounding tape (1) that secures the webcamera/microphone module to the display assembly. 46 Chapter 4 Removal and replacement procedures