HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 41

X-axis capacitor board, for more Cable Kit information.

Get HP ENVY Rove 20-k014us PDF manuals and user guides View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Remove the USB board: 1. Release the ZIF connector (1) to which the USB board ribbon cable is attached, and then disconnect the USB board ribbon cable from the system board. 2. Detach the USB board ribbon cable (2) from the middle frame. (The USB board ribbon cable is attached to the middle frame with double-sided adhesive.) 3. Remove the three Phillips PM3.0×6.5 screws (3) that secure the USB board to the display assembly. 4. Remove the USB board (4) and cable. Reverse this procedure to install the USB board. X-axis capacitor board NOTE: The X-axis capacitor board spare part kit does not include the X-axis capacitor board cable. The X-axis capacitor board cable is included in the Cable Kit, spare part number 728048-001. See Cable Kit on page 12 for more Cable Kit information. Description X-axis capacitor board Spare part number 728067-001 Before removing the X-axis capacitor board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Remove the USB board:
1.
Release the ZIF connector
(1)
to which the USB board ribbon cable is attached, and then
disconnect the USB board ribbon cable from the system board.
2.
Detach the USB board ribbon cable
(2)
from the middle frame. (The USB board ribbon cable is
attached to the middle frame with double-sided adhesive.)
3.
Remove the three Phillips PM3.0×6.5 screws
(3)
that secure the USB board to the
display assembly.
4.
Remove the USB board
(4)
and cable.
Reverse this procedure to install the USB board.
X-axis capacitor board
NOTE:
The X-axis capacitor board spare part kit does not include the X-axis capacitor board cable.
The X-axis capacitor board cable is included in the Cable Kit, spare part number 728048-001. See
Cable Kit
on page
12
for more Cable Kit information.
Description
Spare part number
X-axis capacitor board
728067-001
Before removing the X-axis capacitor board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
Component replacement procedures
33