HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 39
RTC battery, Remove the Y-axis capacitor board see
View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. Detach the Y-axis capacitor board (3) from the middle frame. (The Y-axis capacitor board is attached to the middle frame with double-sided adhesive.) 4. Remove the Y-axis capacitor board. Reverse this procedure to install the Y-axis capacitor board. RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 728072-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). 6. Disconnect the battery cable (see Hard drive on page 27). 7. Remove the Y-axis capacitor board (see Y-axis capacitor board on page 30). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. Component replacement procedures 31