HP ENVY Rove 20-k014us HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 66
Display stand, Wireless antenna, Remove the display stand
View all HP ENVY Rove 20-k014us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Display stand Description Display stand Spare part number 728056-001 Before removing the display stand, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the rear cover (see Rear cover on page 26). 6. Disconnect the battery cable (see Hard drive on page 27). 7. Remove the hard drive (see Hard drive on page 27). 8. Remove the cover bracket (see X-axis capacitor board on page 33). 9. Remove the display stand recess (see Display stand recess on page 41). Remove the display stand: 1. Remove the eight Phillips PM3.0×4.5 screws (1) that secure the display stand to the middle frame. 2. Remove the display stand (2). Reverse this procedure to install the display stand. Wireless antenna Description Antenna Kit (includes left and right wireless antenna cables and transceivers) 58 Chapter 4 Removal and replacement procedures Spare part number 728044-001