HP G32-200 Compaq Presario CQ32 Notebook PC and HP G32 Notebook PC - Maintenan - Page 59
from the WLAN module., Disconnect the two WLAN antenna cables
View all HP G32-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the memory/wireless module compartment cover (see Memory module on page 42). Remove the WLAN module: 1. Turn the computer upside down with the front toward you. 2. Disconnect the two WLAN antenna cables (1) from the WLAN module. 3. Remove the two Phillips PM2.0×4.0 screws (2) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 49