HP G32-200 Compaq Presario CQ32 Notebook PC and HP G32 Notebook PC - Maintenan - Page 65

Top cover, Phillips PM2.5×7.0 screw

Get HP G32-200 - Notebook PC PDF manuals and user guides View all HP G32-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7. Remove the optical drive bracket (2). Reverse the above procedure to reassemble and install the optical drive. Top cover Description Top cover (includes Touchpad and bracket, button board, and cable) Spare part number 608030-001 Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 41). b. Hard drive (see Hard drive on page 51). c. Optical drive (see Optical drive on page 54). Remove the top cover: 1. Turn the computer upside down with the front toward you. 2. Remove the following screws that secure the top cover to the base enclosure: ● (1) 5 Phillips PM2.0×4.0 screws ● (2) 1 Phillips PM2.5×7.0 screw ● (3) 2 Phillips PM2.5×5.0 screws Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
6.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket
(2)
.
Reverse the above procedure to reassemble and install the optical drive.
Top cover
Description
Spare part number
Top cover (includes Touchpad and bracket, button board, and cable)
608030-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
Battery
on page
41
).
b.
Hard drive (see
Hard drive
on page
51
).
c.
Optical drive (see
Optical drive
on page
54
).
Remove the top cover:
1.
Turn the computer upside down with the front toward you.
2.
Remove the following screws that secure the top cover to the base enclosure:
●
(1)
5 Phillips PM2.0×4.0 screws
●
(2)
1 Phillips PM2.5×7.0 screw
●
(3)
2 Phillips PM2.5×5.0 screws
Component replacement procedures
55