HP LH4r HP Netserver LH 3 30/FC Installation Guide - Page 3
HP NetServer LH 3, A3661B High Availability Disk Array Model 30/FC, Cluster Configuration Guide,
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
HP NetServer LH 3 with A3661B High Availability Disk Array Model 30/FC Cluster Configuration Guide 20 November 1998 Introduction This document defines the supported HP NetServer LH 3 with A3661B High Availability Disk Array Model 30/FC (LH 3/Model 30-FC) configurations for Microsoft Cluster Server. These configurations minimize single points of failure, provide maximum availability, and have been certified by HewlettPackard and Microsoft. This guide is prescriptive; it describes the HP NetServer LH 3 / Model 30-FC configurations supported by HP. Any configuration not expressly allowed by this guide will not be supported by HP. What's Defined in Cluster Cluster SPUs Local and Shared Storage Intra-cluster and Client LANs Shared Storage Cabling Cluster Type of SPUs Installation Number of nodes Shared Storage LANs: Client LAN Intra-cluster (Heartbeat) LAN Power source HP NetServer LH 3 Each node must be the same model SPU, but may have different size main memory, cache, and CPU clock speeds. Pedestal or racked 2 HP Rack Storage/8 with HP NetRAID controller and HP disks. See Shared Storage below. Any NIC that is HP and Microsoft approved. See Client LAN below. HP D5013A or J3171A only with crossover cable. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS.