HP LH4r HP Netserver LH 3 30/FC Installation Guide - Page 78
Connect Cascading HP FC-AL Hubs, Connect the FC I/O Adapter to the HP FC-AL Hub
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
NOTE To protect hub ports, port covers should remain installed in all unused ports. 3. Connect Cascading HP FC-AL Hubs If using cascading hubs, connect the two HP FC-AL hubs to each other. • If connecting short-wave hubs, refer to figure 28. • If connecting long-wave hubs, refer to figure 29. - When installing long-wave cascading hubs (HP A4839A), make sure the long-wave port (Port 10) is connected only to the long-wave port (Port 10) on the other long-wave hub. 4. Connect the FC I/O Adapter to the HP FC-AL Hub a. Connect the HP FC-AL hub to the FC I/O adapter on each HP NetServer. Figure 22. An example of an HP FC-AL hub connected to an HP NetServer LXr Pro8 Figure 23. An example of an HP FC-AL hub connected to two HP NetServer LXr Pro8s 27