HP LH4r HP Netserver LH 4 User Guide - Page 101
Install rack nuts at, holes 9 and 13 up, from base line., Base line, Template, Install rack, nuts 11
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Appendix A Installing the NetServer in an HP Systems Rack 2. Install the bezel hinge rack nuts on the left front column (holes 6 and 19 counted up from the base line). Rack nuts are installed on the rear columns to secure the z-bracket, which is secured to the NetServer. Use the rack template to locate the mounting holes (see Figure A-3). 1. Install the z-bracket rack nuts on the right rear column (holes 9 and 13 counted up from the base line). Install rack nuts at holes 9 and 13 up from base line. Base line Template p/n 50645869 Install rack nuts at holes 6 and 19 up from base line. )URQW Install rack nuts 11 and 15 holes up from base line. Figure A-3. Installing Rack Nuts 95
Appendix A
Installing the NetServer in an HP Systems Rack
95
2.
Install the bezel hinge rack nuts on the left front column (holes 6 and 19
counted up from the base line).
Rack nuts are installed on the rear columns to secure the z-bracket, which is
secured to the NetServer. Use the rack template to locate the mounting holes (see
Figure A-3).
1.
Install the z-bracket rack nuts on the right rear column (holes 9 and 13
counted up from the base line).
Install rack nuts at
holes 9 and 13 up
from base line.
Base line
Template
p/n
5064-
5869
Install rack
nuts 11 and
15 holes up
from base
line.
Install rack
nuts at holes
6 and 19 up
from base line.
Figure A-3. Installing Rack Nuts